Anthony has 20 years of experience in CAD/CAM – he began his career designing & CAM programming for the TCF (Textile, Clothing Footwear) Industry. A love for CAD/ CAM grew into contracting for toolmakers using various CAD packages to design and program toys, automotive parts, mining components and sporting goods. From here he spent 10 years using Unigraphics/ NX to design and manufacture golf clubs for major players in the Golf industry. Anthony is an expert in CAD management and customising NX to suit specific & complex environments.

Skills Matrix / Specialities

• Design
• Free form design
• Customisation of NX
• CAM programming
• Jigs and Fixtures
• TCF
• NX postprocessors using NX post builder

Garry is a PLM specialist with over 9 years of experience. He has extensive experience particularly in the Aerospace and Defence sector within Australia having worked with companies such as Tenix Marine and Tenix Land Systems (both now BAE Systems Australia), Australian Aerospace, Australian Submarine Corporation (ASC), and Air Warfare Destroyer (AWD). He also has a Graduate Diploma in Electronic Document Management from RMIT University.

Skills Matrix / Specialities

• Teamcenter
• Enovia PLM
• Requirements / Gap Analysis
• Process Analysis
• Installation and Configuration
• Configuration Management
• Document and Content Management
• Change Management
• Project Management
• Training
• Data Migration
• System Integration

James has over 20 years of hands on experience in the field of engineering. He trained as a Mechanical Engineering Cadet with BHP at their Wollongong steel works, and from there he moved on to work in the motor sport and film industries as a Specialist Machinist and Fabricator. James has subsequently become an accomplished design engineer with 8 years of experience using NX and Teamcenter. James is a PLM Systems Engineer for PhoenxPLM specialising in Teamcenter application and integration.

Teamcenter

• NX integration
• Solidworks integration
• ProE / Creo integration
• Revision Rule usage and best practice
• Structure Management
• Baseline, Snapshot usage and best practice
• Manufacturing Resource Library (MRL), Native NX and Teamcenter managed modes
• Advanced Manufacturing – Manufacturing Part Planning (PP) – Manufacturing Process Planning (MPP)

Michael has 25 years of experience in NX CAM. His specialties are Mechanical Design, Plastics, Dynamic – Static Kinetics, Mold Design, Sheet Metal Design and Flattening, Fabric and Composite Layout. A key mentor and trainer for a vast majority of NX CAM users in Australia and New Zealand Michaels passions are to optimise design and machining time.

Skills Matrix / Specialities

• CNC Programming
• Post processing
• Post – Building
• Machine Toll Simulation
• Tooling
• Tool Libraries
• Jigs and Fixtures
• High Speed Machining
• Aerospace
• Automotive
• NX postprocessors using NX post builder

Peter is both a qualified Fitter & Turner and Design Draftsman. He began his career with the Australian Defence Department as a Design Draftsman. Fast forward 45 years and Peter’s career is vastly accomplished having succeeded in senior CAD & Data Management roles at McDonnell Douglas, Unigraphics Solutions, EDS, Computervision, Easinet and Data General.

Today Peter is providing services including training and implementation of CAD and PLM systems for advanced manufacturing.

Skills Matrix / Specialities

• Mechanical Design and Drafting
• Technical Documentation
• CNC programming
• Product Data Management
• Routing Systems Mechanical/Electrical

Reece has 17 years’ experience developing & implementing PLM systems largely focussing on Change Management, BoM Management, Document Management, MRO and Content Management. A stellar career preceded Reece’s role with PhoenxPLM having been involved at a senior level with various notable projects including – BAE Systems Australia, Perkins Engines (Caterpillar), Terex, General Dynamics, Royal Australian Navy, Over The Horizon Radar, BAE Systems Military Air Solutions, CSIRO ASKAP, Siemens, Department of Defence.

Skills Matrix / Specialities

• Teamcenter
• Requirements / Gap Analysis
• Process Analysis
• Solution Design
• System Architecture
• Change Management
• BOM Management
• Documentation Management
• Manufacturing Process Management
• Maintenance, Repair and Overhaul
• Service Lifecycle Management and Content Management
• Installation and Configuration
• Data migration
• ERP Integration

Robert Cleavey is one of PhoenxPLM’s Technical Team ‘All-rounders’ with experience in Defense, Automotive and CPG across CAD, CAM and Teamcenter.

A PLM Solutions Architect and Mechanical Engineer who has 17+ years’ experience in PLM over multiple industries, Robert has led the implementation of PLM systems at companies such as Tenix Defence – Land Division, Australian Aerospace, Hamilton Jet, Pacific Brands, Northrop Grumman and Toyota.

Through his career Robert has involved himself in both the Pre-Sales and Post Sales PLM cycle and therefore understands the full PLM end to end process.

Skills Matrix / Specialities

• RFI, Tender Analysis and Response
• Demonstration Development and Presentation
• PLM Workshop
• Product Training
• Project Definition and Scoping
• Process definition and mapping from legacy systems to PLM
• System architecture definition
• Change management development and delivery
• Leadership for the deployment of a correspondence management system
• Identify and mitigate risks whilst developing deployment strategies
• Technical & Functional Specification preparation and review
• Data Migration
• Loading Documentation data such as Word, Excel, PDF etc documents
• Loading CAD data from AutoCAD and CATIA systems.
• Conversion of custom desktop wizards to web deployed wizards.
• UAT and End user roll out.
• Responsible for System upgrades, including Application and Database
• Responsible for the deployment of the PLM Apparels

Highly experienced in NX CAD Rodney has been a professional in the Manufacturing Industry since 1980. His experience spans across manufacturing sectors including Medical, White Goods and Automotive. Rodney was part of the software development company EDS (Unigraphics). Today Rodney is a key part of the PhoenxPLM business performing high quality software services including installations, configurations, onsite support, consulting, project based assistance and training.

Skills Matrix / Specialities

• Product Design
• Industrial Design & Styling
• Drafting & Documentation
• Electromechanical Design
• Mechatronics Design
• Visual Analytics & Validation
• Process-Specific Applications
• NX Productivity Tools

Simon has a Bachelor of Science (Computer Science & Software Engineering) and more than twelve years of experience in the Information Technology industry.

A substantial career as a consultant to defence and defence industry (Austal, Boeing, and Mercedes) saw Simon focused on deploying Teamcenter Enterprise, Teamcenter Reporting & Analytics and Teamcenter.

Simon has extensive experience in requirements gathering, design, change management, development, testing, install, transition into service and through-life sustainment activities. He has designed and implemented fully virtualised testing environments for various Teamcenter deployments.

Skills Matrix / Specialities

• Teamcenter Enterprise
• Teamcenter Reporting & Analytics
• Teamcenter Unified
• Business Process Improvement
• WebSphere Administration
• Risk analysis and mitigation
• Service Management
• Requirements Analysis
• Project Management
• Business Analysis
• VMware Administration
• Oracle Administration
• Systems Implementation and Administration
• Configuration Management
• Process Improvement
• Product Development
• Solution Architecture
• Agile Methodologies
• ITIL V3 Foundation